|
|
By Oleg Mazurov  Arduino reading digital scale
I am the proud owner of Stamps.com Model 510 5lb digital scale. It is a nice little scale which works very well (much better than Stamps.com service itself) while attached to my workstation. The scale doesn’t have a display making any kind of standalone use difficult. However, since the scale is a USB HID device reading data from it should be as easy as from a joystick and Arduino board should be adequate to provide a display function for it. To test this theory I made a simple setup consisting of Arduino UNO, USB Host shield and HD44780-compatible LCD display. I also wrote a small sketch which polls the scale and outputs the weight. The secondary objective of this project was to demonstrate LCD support in USB Host shield library.
For this project I used the following:
- An Arduino board. Standard size board, such as UNO, Duemilanove or Leonardo, will work
- USB Host Shield
- Toshiba HD44780-compatible LCD display, in 16×1 or 16×2 configuration. If you’re planning to use this sketch for something else, like data logging, the display is optional – all output from the scale is repeated to the serial port
- Stamps.com 5lb digital scale. Scales are standard HID devices with usage table 0x8d, therefore, scales from other brands may work as well with no or minimal modifications to the code
- USB Host library
The example code is also hosted at github, as well as in ‘examples’ section of the library under ‘HID’. It has been tested with Arduino IDE version 1.0.5.
In this project, the LCD is connected to the shield’s GPOUT pins, as documented in max_LCD.h header file. In addition to data lines, 5V and ground must also be connected to the shield’s 5V and GND terminals; the RW pin must be grounded – I do it on the LCD itself. In order to see the characters, the display must be biased – a 5K-10K pot with wiper on Vo and other two pins on 5V and ground will provide contrast adjustment.
Continue reading Adding a display to a digital scale using Arduino and USB Host shield
By Oleg Mazurov  Scanning barcodes using Arduino and USB Host Shield An addition of Human Input Device Class support to USB Host Shield library 2.0, announced several days ago allows using powerful and inexpensive input devices with USB interface in Arduino projects. Sample sketches demonstrating sending and receiving data to one of the most useful HID device types – boot keyboard/mouse, has been released along with the library. The beauty of boot protocol lies in the simplicity of device report – a data packet containing information about button presses and mouse movements. However, samples were designed to demonstrate all features of the class and because of that, they are somewhat heavy. In real-life applications, it is often not necessary to implement each and every virtual function – only what is needed. In today’s article I will show practical application of HID boot device building a simple gadget.
Originally, HID boot protocol was meant to be used with keyboards and mice. When USB became popular, other keyboard-emulating devices, such as barcode scanners and magnetic card readers have been migrated from PS/2 standard to USB while keeping their keyboard-emulating property. As a result, many modern “not-so-human” input devices behave exactly like a keyboard including boot protocol support. A gadget that I demonstrate today is portable autonomous barcode scanner built using Arduino board, USB Host shield, handheld USB barcode scanner and LCD display (see title picture). The operation is simple – when handheld scanner button is pressed, it scans the barcode and sends it to Arduino symbol by symbol. Arduino then outputs these symbols on LCD display. LCD is erased before outputting each new barcode by tracking time between arrival of two consecutive symbols. To keep the code simple, I intentionally did not implement any data processing, however, since Arduino sketch for the gadget compiles in just a little over 14K, there is plenty of memory space left for expansion.
Continue reading Connecting barcode scanner to Arduino using USB Host Shield
By Oleg Mazurov  HD44780 LCD display Introduction.
As time goes by, microcontrollers become more powerful, cheaper, and smaller. A typical micro of the past could have had 40 pins and no internal memory. On the contrary, modern J-series PICs are made with 96K program memory and 28 pins. We can drive a lot of peripherals with that amount of memory, however we are getting short on pins.
In this article I will show how to drive a parallel interface peripheral serially. A HD44780-compatible LCD module is good candidate – it is popular, inexpensive, and slow, so you won’t be losing any speed while converting parallel to serial. And you could even save some money using a micro with fewer pins.
Continue reading Interfacing LCD via SPI.
|
|
