Development of Arduino_Camera_Control library (which runs on top of USB_Host_Shield library written to support USB Host Shield ) continues at steady pace. Nikon point-and-shooters has been on a test bench for the last couple of weeks and they are already talking. Even more exiting is the fact that they are talking the language we already know – the plain old PIMA 15740-2000.
Arduino-controlled Nikon P100
It also looks like that PTP protocol implementation in all Nikons is very close to the standard with very few vendor extensions and it will be possible to use the same code base for both point-and-shoot cameras and DSLRs. In this article, I’m showing a lightweight implementation of Capture command for Nikon cameras. Unlike its’ sister sketches, EOSCapture and PSCapture, this one can’t really be called NikonCapture – keep reading to find out why.
The InitiateCapture command, which is part of standard PTP command set can be seen in PTPDevInfo output of several Canon PowerShot and all Nikon cameras – see, for example, Canon A640 section, line 82 or Nikon Coolpix S4000, line 47. Regrettably, PowerShots seem to require setting D045 vendor-defined property before this command will be accepted by the camera; therefore, PowerShot-specific class would have to be instantiated, adding significantly to program size. On the other hand, Nikons are happily executing InitiateCapture as-is.
The following sketch does what other “…Capture” sketches do – it takes a shot once a second second in an endless loop. What makes it different is that it doesn’t use any vendor-specific code, compiles in ~9K and can be loaded into Atmega168-based boards leaving plenty of room for another functions.